When you start doing something new, you want to know the tips to accomplish that task. Same goes to concreting, you need to know what to do to complete the project and what not to do.
Since, concrete is the most composite construction material, which has different composition and functions respectively. To complete the concrete project you’ll avoid doing all the things that led your concrete to failure.
Your concrete project will be successful if it involves all the right approach and neglects the negative approach. Your RIGHT CONCRETING APPROACH can avoid future repair and maintenance that occurs due to bad practices in concrete construction.
Additionally, we should always be alert while working to elude any kind of accidents on the job. And this is exactly why knowing Do’s and Don’ts of Concrete Pumping is necessary.
Tips for Safety Measures in Concrete Pumping
Working on a construction project is not without danger and presents several hazards during the construction process. So, using safety measures can be the only solution to eliminate accidents.
#1: Contractor Responsibility
The organization is the key to trim down safety issues at the concrete pumping worksite. However, the company/contractor should be held responsible to order suitable equipment required for the job. So, they should know Do’s and Don’ts of concrete pumping to remedying dangerous situations to prevent accidents.
The concrete pumping operators should receive safety certification so that they can save themselves in the worst situation. All the person in a crew must be aware of security in order to prevent accidents from occurring.
#2: Preparing the Site
Before you start pumping you should prepare the site properly. You should have enough space to stand pumping truck if you don’t remove all the clutters. Additionally, there should be an adequate gap to handle multiple Commercial Concrete Pump.
This can cause the most critical accidents so all the crews working on the construction site should receive power line and electricity safety training.
They should mark existing power lines with cones. Additionally, conduct a meeting and discuss how to successfully complete the pouring operation and handling safety methods to avoid nearby power lines.
Adequate cribbing is mandatory to distribute the weight or balance the cement load. To balance the load, Pump manufacturers do supply some outriggers pad with the pumping equipment.
Company/Contractor should have added supply of steel plates or wood dunnage to balance the load as and when needed.
The poor outrigging process can be the reason for several accidents on the construction site when pouring concrete. Site surface should withstand the weight of an outrigger, if not prepare the site well. An unknown void on the worksite can also cause hazards.
The soil type as they have different load-bearing capacity also plays a critical role when it comes to keeping outriggers safe and sturdy.
#3: Concrete Pumping Insurance
Irrespective of how well the concrete pumping job is devised, accidents can still happen. Be sure to get concrete pump insurance to guard company and employees.
Concrete Pump insurance can cover general liability coverage, physical damage and auto liability, and workers compensation as well. Concrete pumping can be a dangerous job and contractors should always take safety precautions.
Now, let’s see the Do’s and Don’ts of Concrete Pumping and to place a truck-mounted Trailer Pump.
Do’s of Concrete Pumping
- Hire trained and certified operators.
- Prepare the ground properly using outrigger pads.
- Operators should always wear appropriate safety measures.
- Only use the equipment that is working correctly and has been inspected for safety.
- Get away with all the personnel when air is entering the placement system.
Don’ts of Concrete Pumping
- Don’t use a boom to replace the job of a crane.
- Don’t open a coupling when it’s pressurized.
- To clean clogged lined don’t climb on hydraulic systems.
- Don’t stand in front of the discharge end of the cement channel.
- Never handle clogged hoses that are under pressure.
- Don’t operate or set up a concrete pump if it’s dark.
Final Words: Do’s and Don’ts of Concrete Pumping
Employing the proper safety equipment and resolving safety issues lowers the chances of concrete pumping accidents. Maple Concrete Pumping is a dedicated concrete company for over 8 years to solve all your concrete problems.
We have the best certified and experienced professional to accomplish concrete pumping task. Our crews know all the safety measures and they can eliminate any kinds of accidents over the worksite. We do provide concrete pumps on rental on an easy weekly, monthly, and long term basis.
We can help you learn Do’s and Don’ts of Concrete Pumping to avoid accidents on the construction site. Do contact us for concrete pumping services from the pros.